Description

Details
Resolve Pet Expert High Traffic Carpet Cleaner Foam is designed with you in mind. It helps ensure that your high traffic areas (hallways, stairs & living rooms) are clean, fresh and soft. Removes 3X more pet hair & dirt vs vacuuming alone, with freshening agents and a special conditioning ingredient. Pet Expert high traffic foam cleans pet messes the 1st time! Powerful Odor Stop technology eliminates pet odors and freshens with a light, clean scent. It also protects against pet stains like urine, vomit, feces & tracked-in dirt, while helping prevent future pet resoiling. This foam makes carpet cleaning super easy! It is safe to use on wool, nylon and stain-resistant carpet. Try this with the Resolve Easy Clean Pro Carpet Cleaning System.

Ingredients
Pet Expert Carpet Foam.

Directions
Before Cleaning: Vacuum carpet thoroughly to remove loose dirt. Test a small, hidden area for colorfastness and examine when dry. If color is affected do not use. For upholstery, look for manufacturer’s cleanability code tag. Use on fabrics coded WS or W. If coded X or S, do not use. Not recommended for use on velvet, silk, vinyl, or leather. Do not use Resolve Easy Clean Pro on any surface other than carpets. Do not spray directly on pets. Large Area Carpet Cleaning: 1. Shake can well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3 foot square area. 2. Work the foam into carpet in two directions using a damp, colorfast mop. 3. Repeat steps 1 & 2 until the entire area is cleaned. 4. When dry, vacuum thoroughly to remove dried foam and loosened dirt. For Use in Resolve Easy Clean Pro Carpet Brush: 1. Remove spray cap from Resolve High Traffic Foam 22 oz can. Shake the can vigorously before each use. If the can is already in the gadget, remove and shake again. 2. Insert can into the gadget and rotate clockwise until it gently clicks into the locked position. 3. To remove the can, rotate counter-clockwise into the unlocked position and gently pull upwards. 4. Pull trigger to dispense foam, then brush the foam into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt. 5. Replace spray cap to can for standard use. Upholstery Cleaning: 1. Blot wet soils with a clean absorbent cloth. 2. Shake can well and generously apply directly to stain from a distance of 4-6 inches. Allow foam to absorb into stain for 3 minutes. 3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not overwet fabrics. Hint: To avoid rings, clean entire section where soil occurs. 4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use. 5. Only use spray cap to dispense foam for upholstery cleaning. To ensure complete dispensing during life of product, tilt can downwards at approximately 60 degrees while spraying. Contents will clean a carpeted area of 168 square feet (12 feet x 14 feet). If accidentally sprayed on wood furniture, just wipe off. For Best Results: Use vacuum cleaner with a fresh, empty bag.

Warnings
For external use only. No known significant effects or critical hazards. Read label before use. Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away and have product container or label at hand. When using this product: avoid contact with eyes; in case of eye contact, flush with water. Stop use and ask a doctor if: irritation or redness develops.