Description

Details
Gorilla® Double-Sided Mounting Tape.
Incredibly strong.
Waterproof.
Indoor & outdoor.
Tough & clear.
Holds up to 15 lbs.
Bonds permanently: Plastic*, metal, wood, glass, brick, ceramic, stone & more!
1 in. x 60 in. (25.4 mm x 1.52 m).

Directions
Directions: Surfaces must be flat, dry and free of dirt and oil. Clean with isopropyl alcohol according to manufacturer’s instructions. Use 4 inch of tape per pound of weight. 1. Apply tape to back of object vertically, allowing for even distribution of weight. Avoid touching surface of tape. 2 Cut tape and press to secure tape to object. 3. Remove clear liner and align object to desired placement. 4. Press firmly 60 seconds as Gorilla Mounting Tape conforms to the surface and creates a strong, permanent bond. Tips for Use: Holding weight is based on objects with a maximum depth of 0.75 inch. Objects over 0.75 inch in depth put more stress on the bond and have an increased chance of failure. Tape must make contact with surface. If surface is uneven, tape will not be able to make contact & will not hold. Apply when temperature is above 50 degrees F. In-use temperature range: -40 degrees F to 248 degrees F. For easier liner removal – Pinch and stretch a corner of the adhesive until the liner lifts from the tape. Apply tape vertically. Object depth should not exceed 0.75 inch. Tape must make complete contact with surface.

Warnings
Important:
This is a permanent tape and may cause surface damage or leave residue if removed.
Not for use in applications where injury could results if mounted item fell.
*Not for use an wallpaper, delicate surfaces, polyethylene and polypropylene plastics, Teflon® or other non-stick surfaces.